JVC FS-GD7 Service Manual page 15

3.1.8 Removing the fan
(See Fig.22 to 24)
• Prior to performing the following procedure, remove the side
panel (R)/(L), the top panel.
(1) From top of the body, disconnect the wire from connector
CN205 on the amp board.
(2) From the back of the body, remove the five screws Q at-
taching the rear cover.
(3) From the back of the body, remove the four screws U at-
taching the fan.
Main board
CN401
Tuner pack
Rear cover
Amp board
CN205
Rear panel
Fan
Fig.22
Q
Rear panel
Q
Raer cover
Fig.23
Fan
U
U
Rear cover
Fig.24
Q
Q
U
U
(No.MB355)1-15