Admin Login; Figure 2 : Web Ui Login; Figure 3 : Change Password On First Boot - Grandstream Networks WP810 Security Manual

access on the device is enabled by default with port 22 used. It's recommended to disable it for
daily normal usage. If SSH access needs to be enabled, changing the port to a different port other
than the well-known port 22 is a good practice.

Admin Login

Username and password are required to log in the WP810's web UI.
The factory default administrator username is "admin", and the random password can be found on the
sticker at the back of the unit. Changing the default password at first time login is highly recommended.
When accessing the WP810 phones for the first time or after factory reset, users will be asked to change
the default administrator password before accessing WP810 Web interface.
To change the password for default user "admin", navigate to Web GUI → Maintenance →Web Access

Figure 2 : Web UI Login

Figure 3 : Change Password on First Boot

WP810 Security Guide
P a g e | 5