Table of Contents
Advertisement
Advanced Fax
1
Features
Advanced Copy
Features
2
System Monitor
3
Reports and Lists
4
Troubleshooting
5
Appendix
6
Table of Contents
Index
■
Memory Reception
The machine automatically receives faxes in memory when
printing is disabled under certain conditions (e.g., toner or paper
has run out). You can also set the machine to store all
documents in memory without automatically printing them.
1.
Press [Additional Functions].
2.
Use [
] or [
] to select <SYSTEM
SETTINGS>, then press [OK].
3.
Use [
] or [
] to select
<COMMUNICATIONS>, then press [OK].
4.
Use [
] or [
] to select <MEMORY
LOCK>, then press [OK].
5.
Use [
] or [
] to select <ON>, then press
[OK].
NOTE
When you select <OFF>, the machine starts to print the received
documents in memory.
6.
Confirm that <PASSWORD> is displayed,
then press [OK].
Back
Previous
7.
Use the numeric keys to enter the memory
reception password (up to seven digits), then
press [OK].
Ex.
P A S S W O R D
1 2 3 4 5 6 7
8.
Confirm that <REPORT PRINT> is displayed,
then press [OK].
9.
Use [
] or [
] to select <ON> or <OFF>,
then press [OK].
<ON>: Prints a memory reception report.
<OFF>: Does not print a memory reception report.
10.
Confirm that <MEMORY RX TIME> is
displayed, then press [OK].
Perform steps 10 to 15 to specify the period of memory reception.
11.
Use [
] or [
] to select <ON>, then press
[OK].
12.
Confirm that <MEM RX START TIME> is
displayed, then press [OK].
TOP
Next
1-12
Advertisement
Table of Contents
