Table of Contents
Advertisement
Advanced Fax
1
Features
Advanced Copy
Features
2
System Monitor
3
Reports and Lists
4
Troubleshooting
5
Appendix
6
Table of Contents
Index
Telstra FaxStream™ Duet (Only for Australia)
In Australia, Telstra offers the FaxStream™ Duet capability. If
you subscribe to this service, your line is assigned two numbers:
one for fax and one for phone. When the fax number is called,
the network sends a specific ringing tone which your machine
recognizes and automatically handles as a fax call. If the phone
number is called, a different ringing tone is sent out from the
network so that the call is handled as a voice call.
This means that there is no switching delay at the caller's end.
– Triple ring (short-short-short) for fax receiving. Three short
rings, at regular intervals.
– Any ring except triple ring (depending on your switchboard)
for telephone conversation.
Contact Telstra for connection information.
If you want to set the machine for network switch, set the receive
mode to <NET SWITCH>.
● When You Hear the Telephone Call Ring Pattern
Pick up the handset of the external phone and talk normally. If
you hear a slow beep, it means the call is from a fax machine
trying to send a fax. Press [Start] on your machine to receive the
fax. If you do not pick up the handset, the machine continues to
ring until the other party hangs up. If an answering machine is
connected, it takes over the call.
● When You Hear the Fax Call Ring Pattern (Triple Ring)
After the machine rings, it receives the document automatically.
Back
Previous
Telecom FaxAbility (Only for New Zealand)
In New Zealand, Telecom N.Z. offers the FaxAbility capability.
This service allows you to assign two numbers to your line: one
for fax and one for telephone. When the fax number is called,
the network sends a specific ring tone which your machine
recognizes and automatically handles as a fax call. If the
telephone number is called, a different ring tone is sent out from
the network so that the call is handled as a voice call. This
means that there is no switching delay at the caller's end.
Contact Telecom for connection information.
If you want to set the machine for network switch, set the receive
mode to <NET SWITCH>.
● When You Hear the Telephone Call Ring Pattern
Pick up the handset of the external phone and talk normally. If
you hear a slow beep, it means the call is from a fax machine
trying to send a fax. Press [Start] on your machine to receive the
fax. If you do not pick up the handset, the machine continues to
ring until the other party hangs up. If an answering machine is
connected, it takes over the call.
● When You Hear the Fax Call Ring Pattern
After the machine rings, it receives the document automatically.
TOP
Next
1-11
Advertisement
Table of Contents
