Power Lumbar; Heated Seats - Buick 2003 Park Avenue Owner's Manual

Power Lumbar Heated Seats
If your vehicle has this
feature, the power lumbar
control is located on
the outboard side of each
front seat. Use the
power seat control first to
get the proper position.
Then continue with
the lumbar adjustment.
To reshape the lower seatback, press the lumbar
control forward to increase support and rearward to
decrease support. Press the control up or down to raise
or lower the support mechanism.
Keep in mind that as your seating position changes,
as it may during long trips, so should the position of your
lumbar support. Adjust the seat as needed.
It
you have the Independent tront cusnlon movea aown
as far as it will go, you may feel the lumbar support
higher in your back. Readjust the location of the cushion
until you are comfortable. You may also want to
adjust the seatback for maximum comfort.
If your vehicle has this option, press this button to turn
on
the heating element in the seat.
climate controls on
the instrument panel.
When the heated seat control is first pressed,
the HI setting is activated. Press the button again
for the LO setting. The third press of the button
turns the feature off.
The LO setting warms the seatback and cushion until
the seat nears body temperature. The HI setting
heats the seat to a slightly higher temperature.
A light on the control reminds you that the heating
system is in use. When the ignition is turned off,
the heating element is also turned off.
1 -3