Shifting Out Of Park (P) - Buick 2003 Park Avenue Owner's Manual

Torque Lock
If you are parking on a hill and you don't shift your
transaxle into PARK (P) properly, the weight of
the vehicle may put too much force on the parking pawl
in the transaxle. You may find it difficult to pull the
shift lever out of PARK (P). This is called "torque lock."
To prevent torque lock, set the parking brake and
then shift into PARK (P) properly before you leave the
driver's seat. To find out how, see Shifting lnto Park (P)
on page 2-33.
When you are ready to drive, move the shift lever out
of PARK (P) before you release the parking brake.
If torque lock does occur, you may need to have another
vehicle push yours a little uphill to take some of the
pressure from the parking pawl in the transaxle, so you
can pull the shift lever out of PARK (P).
Shifting Out of Park (P)
Your vehicle has an automatic transaxle shift lock
control system. You have to fully apply your regular
brake before you can shift from PARK (P) when
the ignition is in RUN. See Automatic Transaxle
Operation on page 2-29.
If you cannot shift out of PARK (P), ease pressure on
the shift lever
-
push the shift lever all the way into
PARK (P) as you maintain brake application. Then move
the shift lever into the gear you want.
If you ever hold the brake pedal down but still can't shift
out of PARK (P), try this:
1. Turn the key to OFF. Open and close the driver's
2. Apply and hold the brake until the end of Step 4.
door to turn off the RAP feature.
3. Shift to NEUTRAL
(N).
4. Start the vehicle and then shift to the drive gear
you want.
5. Have ine venicie iixea as soon as you can.
2-35