SFM3
Wood Stud Location
1.
Using a stud finder, locate the 16" or 24" stud centers behind the wall.
2.
Once found, make a pencil mark on the center of the wood studs (Figure 7).
Stud Finder
3.
Measure from the floor to the desired viewing height and mark the wall (Figure 8).
NOTE: This marking will reference the center of your flat panel display once mounted to the wall.
Page - 8 -
Figure 7. Locating the Wooden Stud
16"
Figure 8. Measuring the Height
Mark
16"
Wooden Studs
Measure and
Mark the Desired
Viewing Height
on the Wall
Installation Instructions