SFM3
Mounting Bracket Positioning
1.
Lay the left and right mounting brackets (stamped arrows facing out) (Figure 3).
Arrows Facing OUT
NOTE:
The mounting guides are designed with a center viewing guide on the side of them. There will be a
"notch" cut on the side of the bracket (Figure 4).
Center of Flat
Panel
2.
Match the center of the viewing guide with the centerline you marked in Step 1 (Figure 4).
Page - 6 -
Figure 3. Mounting Bracket Installation
Figure 4. Locating the Center of the Flat Panel
Mounting Brackets
Bottom of Flat Panel
Mounting Bracket
Bottom of Flat
Panel
Center of
Viewing Guide
Installation Manual