Securing The Wall Plate To The Wooden Studs - Sony SFM3 Installation Manual

SFM3
4. Use the information below when mounting to the following surfaces (Figure 10):
Wood Studs: Drill four (4) ¼" pilot holes to the marked wall.
Concrete Wall: Drill four (4) 3/8" pilot holes to the marked wall

Securing the Wall Plate to the Wooden Studs

1. Level and secure the plate to the wall with the reference arrow facing up to ceiling.
2. Secure the plate using four (4) 5/16" lag bolts and flat washers (Figure 11).
CAUTION: Do not over tighten the lag bolts.
NOTE: The wall plates have three 16" and 12" mounting slot positions.
Installation Manual
16"
Figure 10. Mounting Surfaces
Figure 11. Securing the Wall Plate
Drill Gun
Pilot Holes
Level
5/16" x 3" lag bolt
and flat washer
Wall Plate
Page - 9 -