2-1. Boards Location
Switching
regulator
2-2. Precaution in Wiring Harness
. The harness inside the MB-806A are laid out so that they are not positioned close to the heat-producing parts or high
voltage present parts by routing the harnesses properly or using purse locks.
Therefore, when the boards are replaced (or parts are replaced), be sure to return the harnesses to their original locations
(see the following illustration).
. When replacing a board (or when replacing a part), turn the POWER switch OFF , and unplug the power cord from the
AC inlet.
*
*
*
MB-806A (CE)
WRU-806A (CE, AU)
Section 2
Service Overview
MB-806A
CN-1908
*
*
MB-871
CN-1907
WRU-806A
(Tuner Unit)
Clamp (
)
Purse lock (*)
RF-92
DP-305
: 3 pieces
: 5 pieces
2-1