Test Equipment Setup; Equipment Required - Panasonic EB-X300 Service Manual

7.4. Test Equipment Setup

7.4.1. Equipment Required

GSM
Tester
IMPORTANT NOTE
To allow accurate measurement of the complete unit the test equipment must be connected as shown,
To test the handheld unit, the following equipment is required.
1. PCB Repair Jig
2. Power Cable
3. Download Cable
4. RF Cable
5. 12 V power supply
6. Personal computer with RS232 interface and running Microsoft Windows
7. GSM test station
8. EB-X300 Service software
The EB-X300 Service software should be installed onto the main drive of the personal computer.
The RF cable is connected to the GSM test station via a suitable adaptor. The 3.8 V supply is connected to the RF Adaptor and
PCB Repair Jig using the power cable.
NOTE: A suitable test SIM card compatible with the GSM test station will be required.
RF Cable
GSM
RF Cable
Tester
3.8V DC
Power
Power Cable
Supply
COMPLETE UNIT TEST SETUP
Figure 7.6. : Test Connection Diagram
PCB TEST SETUP
Download Cable
95, 98, XP or 2000
®
– 7-4 –
Download Cable
PC
3.8V DC
Power Cable
Power
Supply
PC