Test Equipment Setup; Equipment Required - Panasonic GSM EB-A100 Service Manual

7.4. Test Equipment Setup

7.4.1. Equipment Required

IMPORTANT NOTE
To allow accurate measurement of the complete unit the test equipment must be connected as shown,
For testing the handheld unit the following equipment is required:
1. PCB Repair Jig
2. Power Cable
3. DL Cable
4. RF Cable
5. 12 V power supply
6. Personal computer with RS232 interface and running Microsoft Windows
7. GSM test station
7. A100 Service software
The A100 Service software should be installed onto the main drive of the personal computer.
The RF cable is connected to the GSM test station via suitable adaptor. The 3.8 V supply is connected to the RF Adaptor and
PCB Repair Jig with power cable..
NOTE: A suitable test SIM card compatible with the GSM test station will be required.
COMPLETE UNIT TEST SETUP
Figure 7.6. : Test Connection Diagram
– 7-4 –
95, 98, XP or 2000
®