Mmi Test - Panasonic EB-X300 Service Manual

8.2. MMI Test

When the handset is in Idle screen, the following functions can be checked by pressing *#369#.
Note that the items 4, 5 and 7 are for manufacturing purpose only. Changing their values may result in malfunction of the
handset.
1. Contrast: Up& Down to adjust; Select & Back to exit.
2. Baseband test: Up & Down to chose item; Select to enter.
Illumination: test if the backlight shows; OK to exit.
Buzzer: test if the ring tone gives sound, OK to exit.
Vibrator: test if the vibrator works, OK to exit.
Keypads: press each key to eliminate the indicators on screen; long press OK to exit.
RTC status: show if the RTC OK; OK to exit.
Microphone speaker: blow into the microphone and listen for sound from the receiver; OK to exit.
LCD test: click Navi-Key to display different colour
Black/ White/ None/ Blue/ Green/ Red/ RGB
3. Software Version: Check the current software version
Software Version
Mapping Version
LP Version
4. Auto-answer: Valid setup when insert test SIM
5. Camera: to active the camera function
6. Defect Cancellation: close the CMOS door and cover with black shelter first. Choose this item and press shutter key then
wait "Success!" message showing. OK to exit.
7. DTMF-On: Determine if DTMF function valid during calling.
8. Comport:
AT-DATA: set phone jack for special D/L port, ex: IMEI burning.
GENIE
Off: set phone jack for normal earphone usage.
CAUTION
– 8-3 –