Setting Up Your Machine - Singer 6199 Instruction Manual

SETTING UP YOUR MACHINE

A l w a y s d i s c o n n e c t t h e
machine from power supply
by removing the plug from
the wall-outlet.
Be sure to wipe off any surplus oil from
n e e d l e p l a t e a r e a b e f o r e u s i n g y o u r
machine the first time.
POWER LINE CORD/FOOT CONTROL
Connect the plug of the power line cord
into the cord socket (1) and your wall outlet
(2) as illustrated.
Connect the foot control plug (3) into the
machine socket.
N O T E : W h e n f o o t c o n t r o l i s
disconnected, the machine will not
operate.
POWER / LIGHT SWITCH
Your machine will not operate until the
power / light switch is turned on. The same
switch controls both the power and the
light.
W h e n s e r v i c i n g t h e m a c h i n e , o r
changing needles, etc., machine must be
disconnected from the power supply.
Machine socket
Set power / light switch at "OFF"
3
1
Foot control
Power / light switch "OFF"
Power / light switch "ON"
Pin plug
2
Power line cord
5