Accessories; Setting Up Your Machine; Power Line Cord, Foot Control; Power/Light Switch - Singer SM024 Instruction Manual

KNOWING YOUR SEWING MACHINE

Accessories

1. Bobbins (3pcs) *
2. Needle 3 pcs
3. Multi-function screwdriver
4. Ripper/Brush
5. Buttonhole foot
6. Hem guide for presser foot
7. Zipper foot
8. Button sewing foot
*Your machine uses SINGER® Class 15J transparent
bobbins. Use only this style of bobbin in your machine.
The foot that comes on your sewing machine is called all-
purpose foot and will be used for the majority of your
sewing.

Setting up your machine

Be sure to wipe off any surplus oil from needle plate area
before using your machine the first time.

Power line cord, foot control

Make sure that the sewing machine is turned off (the power switch is set
to "O"), and then connect the plug of the power line and into the power
cord inlet and your wall outlet.
Sewing speed can be varied with the foot control.
The harder you press on the control, the faster machine runs.
This appliance has a polarized plug (one blade wider than the other). To
reduce the risk of electric shock, this plug is intended to fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician to install the
proper outlet. Do not modify the plug in any way.
When foot control is disconnected, the machine will
NOTE:
not operate.
CAUTION
Always disconnect the machine from power supply by removing
the plug from the wall-outlet.

Power/light switch

Your machine will not operate until the power/light switch is turned on. The same switch controls both the power and the light.
When servicing the machine or changing needles, etc., machine must be disconnected from the power supply.
Power/light
switch "OFF"
Power/light
switch "ON"
3