Cleaning The Feed Dogs And Shuttle Area - Singer 6199 Instruction Manual

CLEANING THE FEED DOGS AND SHUTTLE AREA

A. Raise the needle to its highest position.
B. 1. Remove the bobbin case from the shuttle.
2. Push aside the two shuttle keepers.
3. Remove the shuttle race cover and shuttle.
C. Clean the feed dogs and shuttle area with the lint brush.
NOTE: Put a drop of sewing machine oil on the center pin of the shuttle and
shuttle race as indicated by the large arrows in step B.
Feed dogs
D
D. 1. Be sure the shuttle race forms a half moon on the left side of the machine.
2. Holding the shuttle by its center pin, replace it so as to form a half moon on the right
side.
3. Slide the shuttle race cover back into position.
4. Snap the shuttle keepers back into position.
CLEANING THE SEWING MACHINE AND FOOTCONTROLLER
After using, keep sewing machine and footcontroller clean, use dry rags to remove dust
from the sewing machine and footcontroller.
NOTE: Use dry rags to avoid electrical shock.
44
( 1 )
Shuttle race
( 4 )
Shuttle keeper
( 2 )
Shuttle
( 3 )
Shuttle race cover
Bobbin case