Table of Contents
Advertisement
I
NSTALLATION
EAS D
EACTIVATION
SW1 and SW2 are the switch banks inside the Checkpoint Device that set the deactivation range. The following is a list of
Checkpoint recommended switch bank settings.
Base Model
Checkpoint Recommended Switch Bank Settings
MS2420
SW1 & SW2 switches 1 and 6 set to ON
All MS2420 models have a connector labeled EAS In on the bottom of the unit. Metrologic has an optional EAS cable
(
52-52511x) available for purchase for connection between the Checkpoint Device and the MS2420.
MLPN
Figure 22. EAS Cable Connection (Bottom of MS2420)
The following figure shows the location of the EAS deactivation area for the MS2420. It is important to pass the entire tag
through this area to deactivate the security tag.
Figure 23. EAS Deactivation Area
25
Advertisement
Table of Contents
