Table of Contents
Advertisement
Flip back armrest
Armrests are supplied in desk length (shown) or full length.
To adjust armrest height;
1. lever (1), pull out to adjust height of arm pad Tear drop by lifting or lowering,
once height is determined release lever and move armrest slightly up and
down, the tear drop lever pin will settle in the nearest locking point.
To flip back the armrests;
2. Found at the front of the chair on the outside of the armrest, depress (2)
forward and swing the armrest to the rear. Swing armrest back past the back
cane, this will ease transferring. To return, swing to the front and the armrest
will lock into place.
Warning
Never lift wheelchair by the armrests, as damage may occur.
If there is any outward pressure on the armrests, the chairs seat width may be to
narrow, Consultant your Therapist.
1
6
Advertisement
Table of Contents
