Table of Contents
Advertisement
Configuration
3.1.10 Arrow Buttons
3.2
Turning on the Power
3.3
Initial Unit Setup
16
Siemens Building Technologies
Fire & Security Products
Arrow buttons are used to navigate through menus and GUI. They are also used
to control Pan and Tilt in the PTZ mode, and to move the specific part of screen
that you want to enlarge in the digital zoom mode.
In the playback mode, the Up-Arrow button selects the next image, and the Down-
Arrow button selects the previous image. Pressing the Left-Arrow button plays
video backward at high speed. Pressing the button again toggles the playback
speed from
,
and
Pressing the Right-Arrow button plays video forward at high speed. Pressing the
button again toggles the playback speed from
displays
,
and
Entering Playback mode from Live Monitoring mode can be user password
protected.
Connecting the power cord to the DVR turns on the unit. The unit will take
approximately 60 seconds to initialize.
Before using your DVR for the first time, you will want to establish the initial
settings. This includes items such as time and date, display language, camera,
audio, remote control, record mode, network and password. Your DVR can be set
up using various screens and dialog boxes.
Press the
button to enter the setup screens. The Admin Password screen
Menu
appears.
Fig. 19
Admin Password screen.
Enter the password by pressing the appropriate combination of camera number
buttons and then the
two Setup screens: Quick Setup and Normal Setup. The factory default is the
Quick Setup screen.
. The screen displays
respectively.
button. The factory default password is 4321. There are
,
and
respectively.
,
and
. The screen
SISTORE AX4_EN.doc
09.2004
Advertisement
Table of Contents
