Table of Contents
Advertisement
3.6.2
Alarm In Setup Screen
Siemens Building Technologies
Fire & Security Products
Fig. 35
PTZ Device list.
You can assign IDs to each camera by highlighting the ID heading and pressing
the
button. Change the number by highlighting it and using the arrow buttons to
increase and decrease the numbers. The PTZ ID number can be set from 0 to 256.
Highlight Alarm In in the Main menu and press the
screen appears.
Fig. 36
Alarm In setup screen.
The alarm terminal strip on the back of the DVR has inputs associated with each
alarm. You can set up each input on the Alarm In Setup screen. You can turn
each input On (via Alarm I/O or Camera Alarm) or Off. Each input can be given a
title, and the inputs can be set as NO (normally open) or NC (normally closed)
independently.
Configuration
button. The Alarm In setup
SISTORE AX4_EN.doc
09.2004
27
Advertisement
Table of Contents
