Table of Contents
Advertisement
3.1.5
Quad/Seq Button
3.1.6
Menu Button
3.1.7
PTZ Button
3.1.8
Panic Button
3.1.9
Enter/Pause Button
Siemens Building Technologies
Fire & Security Products
Pressing the
button toggles between quad (2x2) display mode and
Quad/Seq
sequence mode. The camera button LEDs are lit while in the quad display mode,
and the
button LED is lit while in the sequence mode. It is also loads a
Quad/Seq
Preset View in the PTZ mode.
Pressing the
button enters the Main Menu. You will need to enter the
Menu
administrator password to access the Main Menu. Pressing the button again
closes the current menu or setup dialog box. It is also used to display the search
menu in the playback mode, and load the PTZ Menu in the PTZ mode.
Pressing the
button opens a Pan/Tilt/Zoom screen which allows you to control
PTZ
properly configured cameras. The
In the PTZ mode, pressing the
pressing the button again in the digital zoom mode returns
When a PTZ device is not installed, pressing the
directly.
Pressing the
button in the playback mode enters the digital zoom playback
PTZ
mode.
NOTE:
When the DVR is in the PTZ mode, a white line will display around the image.
NOTE:
In the digital zoom mode and digital zoom playback mode, a bright small box is laid over the image.
The box indicates the spot to be enlarged.
Pressing the
button activates panic recording, so the DVR will record video
Panic
regardless of the time-lapse or event recording schedule. Press the button again
to release the panic recording.
NOTE:
When the DVR is recording video, a red dot appears on the screen. When the DVR is in the panic
recording mode, a white
appears in the red dot, and the PANIC LED on the front panel is lit.
This button selects a highlighted item or completes an entry that you have made.
Pressing the
Enter/Pause
screen, and the screen displays
monitoring mode.
Pressing the button in the playback mode will pause the video, and the screen
displays . Pressing
Enter/Pause
monitoring mode.
In the digital zoom mode, pressing the button enlarges a specific area of the
screen. A
displays on the enlarged
button LED is lit while in the PTZ mode.
PTZ
button enters the digital zoom mode, and
PTZ
PTZ
button in the live monitoring mode freezes the current live
. Press the button again to return to the live
button again in the pause mode goes to the live
screen..
Configuration
to the live monitoring mode.
button enters the digital zoom mode
SISTORE AX4_EN.doc
15
09.2004
Advertisement
Table of Contents
