Table of Contents
Advertisement
Scan
1) Click Start > Programs > DiMAGE Scan Elite5400 2 Ver. 1.* > DiMAGE Scan
Elite5400 2 Utility.
2) Set the preferences as below.
Scanning condition
Film Type
Input resolution
3) Click on the Prescan button to prescan the chart.
Check that the chart is scanned as shown and that it is not underexposure.
4) Click on the Point AF button and move the mouse pointer to the center of the image
and then start the Auto Focus.
5) Make sure that all the area of the image is selected and click on the Scan button.
6) Save the image as .BMP file.
7) Add "_P0" after the file name as suffix (***(file name)_P0.BMP).
Measurement
1) Click Start > Program > DPEV > ColorEV.
2) Click Setup > Measure, and set the preference as below.
Color Positive
540 dpi
(2892) 7
Advertisement
Table of Contents
