Table of Contents
Advertisement
Check
1) Open 2892 data sheet.xls in the FD and select the worksheet "Scanner Gauge".
2) Move the mouse pointer to the cell F3, and click Edit > Paste.
The file name is inputted in F3 and the performance data is inputted in the column F.
3) Confirm that the cell G3 is null. * mark in G3 indicates that some of the data was beyond
the standard. Check the items marked * in the column G. (blank: within standard, *: out
of standard)
Be sure to remove the DiMAGEScan.ini from the folder after scanning the chart.
Otherwise images will be underexposed or error message will appear when scanning images
other than the scanner gauge chart.
(2892) 5
Advertisement
Table of Contents
