Honda XRE300 Owner's Manual page 184

XRE300 · XRE300A
Washing the Motorcycle
1. Rinse the motorcycle thoroughly with cool water
to remove loose dirt.
2. Clean the motorcycle with a sponge or soft cloth
using cool water. Avoid directing water to muffler
outlets and electrical parts.
3. Clean the plastic parts using a cloth or sponge
dampened with a solution of mild detergent
and water. Rub the soiled area gently rinsing it
frequently with fresh water.
Take care to keep brake fluid or chemical solvents
off the motorcycle.
They will damage the plastic and painted surfaces.
The inside of the headlight lens may be clouded
immediately after washing the motorcycle.
Moisture condensation inside the headlight lens
will disappear gradually by lighting the headlight
in high beam. Run the engine while keeping the
headlight on.
4. After cleaning, rinse the motorcycle thoroughly
with plenty of clean water. Strong detergent
residue can corrode alloy parts.
5. Dry the motorcycle, start the engine, and let it run
for several minutes.
6. Test the brakes before riding the motorcycle.
Several applications may be necessary to restore
normal braking performance.
7. Lubricate the drive chain immediately after
washing and drying the motorcycle.
Braking efficiency may be temporarily impaired
immediately after washing the motorcycle.
Anticipate longer stopping distance to avoid a
possible accident.
87
(Cont.)