Seat - Honda XRE300 Owner's Manual

XRE300 · XRE300A
Installation
1. Install the left side cover then align the prong
with the grommet and press the side cover into
position.
2. Install and tighten the collar B, bolt B, collar A
and bolt A.
3. Install the clip.
4. (XRE300A only)
Install the ABS modulator cover then align the
prong with the grommet and press the ABS
modulator cover.
5. (XRE300A only)
Install and tighten the collar A and bolt A.
6. (XRE300A only)
Install the clip.
7. Install the tool kit storage compartment lid.

Seat

The seat must be removed for air cleaner maintnance.
Removal
1. Remove the bolts (1) and collars (2).
2. Slide the seat (3) back.
Installation
1. Align the recess (4) to the hook (5) of the fuel
tank and slide the seat into position.
2. Install the collars and tighten the bolts to the
specified torque:
12 N.m (1.2 kgf.m, 9 lbf.ft)
41
(Cont.)