Honda XRE300 Owner's Manual page 178

XRE300 · XRE300A
ABS Fuse Box
(XRE300A)
The ABS fuse box (1) is located behind the left side
cover.
The specified fuses are: 30 A
1. Remove the tool kit storage compartment lid
(page 39) and left side cover (page 40).
2. Open the ABS fuse box cover (2).
3. Pull out the old fuse. If the fuse is blown, install a
spare fuse.
The spare fuse (3) is located in the ABS fuse box.
4. Close the ABS fuse box cover.
5. Install the left side cover and tool kit storage
compartment lid.
(3)
(1)
(1) ABS fuse box
(2) ABS fuse box
cover
(3) Spare fuse
(2)
Main Fuse
The main fuse (1) is located behind the left side cover.
The specified fuse is: 20 A
1. Remove the tool kit storage compartment lid
(page 39) and left side cover (page 40).
2. Remove the starter magnetic switch (2) from the
tabs (3).
3. Disconnect the wire connector (4) of the starter
magnetic switch.
4. Pull out the old fuse. If the fuse is blown, install a
spare fuse.
The spare main fuse (5) is located under the
starter magnetic switch.
5. Reconnect the wire connector and install the
starter magnetic switch.
6. Install the left side cover and tool kit storage
compartment lid.
(3)
(3) (4)
(5)
(1) Main fuse
(1)
(2) Starter magnetic
(2)
switch
(3) Tabs
(4) Wire connector
(5) Spare main fuse
81