Warranty Transfer; Warranty Transfer Service Concept - Nokia NSW-6 Series Technical Documentation Manual

PAMS Technical Documentation

Warranty transfer

Warranty Transfer service concept

1.
Item:
1
2
3
The Warranty cable XMS–3 and 2 pcs Flash adapters FLA–9 are used to
connect two phones and transfer the warranty data (user settings and se-
rial numbers) from one phone to another. The warranty transfer proce-
dure is described below:
Point of Sale
– Phone 1 is broken and Phone 2 is the swap phone.
– Number the phones 1 and 2 to avoid mix–up.
– Plug the warranty cable XMS–3 between the flash adapters and con-
nect the adapters to the phones 1 and 2. (in place of the phone battery)
– Turn the phone 2 on and then on Silent Profile
– Start the warranty data transfer by selecting code *#92772689# in phone
2.
– Select option "Transfer user data?" and press OK, "Confirm transfer?"
Press OK.
– Wait until the transfer is completed.
– Turn Phone 2 off, then back on and check welcome note and profile.
– After the transfer check with WinTesla the original and warranty ESN of
the phone 2.
– Send the broken phone no.1 to the central service.
Issue 1 12/99
Tuning, Flashing and NAM programming instructions
2.
3.
Service accessory:
Service Box
Service Cable
Travel Charger
E Nokia Mobile Phones Ltd.
1.
3.
Type
FLA–9
XMS–3
ACP-8U
NSW-6
Product code:
0770184
0730174
0271610
Page 19