Audio Technica 6000 Series Manual page 7

3.2.1 How to connect a PC with ATW‒R6200 S
(1) Turn off the PC and ATW‒R6200 S before connecting them to a hub or router with DHCP
server.
(2) Connect the ATW‒R6200 S to a hub or router with DHCP server and the PC to a hub or
router with DHCP server using LAN cables.
(3) If you add any additional ATW‒R6200 S receivers, connect LAN cables to available ports
on the hub.
(4) Turn on the hub or router with DHCP, ATW‒R6200 and PC, in this order.
(5) After the successful connection, the link LED on the receiver's Network Interface jack will
light up and its active LED will blink.