Table of Contents
Advertisement
Setting ATW‒R6200 S
Enabling the DHCP server on ATW‒R6200 S
If multiple ATW‒R6200 S receivers have been connected, enable the DHCP server on only
one of them. Set a static IP address on the ATW‒R6200 S to be the DHCP server.
(1) Set [IP Select] of [Network] to [STATIC].
1) From the main menu, turn the control dial to select [Network] and press the
control dial.
2) Select [IP Select] and press the control dial.
3) Select [STATIC] and press the control dial.
(2) Set the IP address at [IP Address] of [Network].
Advertisement
Table of Contents
