Fill The Water Tank; Set The Temperature - Singer SteamCraft Plus Instruction Manual

Using Your SteamCraft Plus Steam Iron
1. This appliance is designed to use normal tap water. Use of other liquids may damage
the appliance.
2. Plug in the appliance to an appropriate electrical outlet.
3. Start ironing when icons on the display panel stop blinking. This indicates the selected
temperature has been reached and the iron is ready for use.
4. Always unplug the appliance after use.

FILL THE WATER TANK

1. Unplug the Power Cord from electrical outlet.
2. Move Steam Selector to the
3. Open Water Tank Door and fill Water Tank with
water (to Max level).
4. Close the Water Tank Door.
5. Plug in Power Cord to electrical outlet and press
the Temperature Select Button to switch on the
appliance.
IMPORTANT: Never add fabric conditioner, starches or any other chemicals to water in your
iron. Ensure your iron is switched off and unplugged from electrical outlet before filling.

SET THE TEMPERATURE

The appliance has different temperature settings to handle different fabrics. Press the
Temperature Select Button and toggle to the your preferred heat setting. The appliance
will start at Low (
NYLON
the Temperature Select Button and cycle through the sequence, from "Low (
"Medium (
WOOL/SILK
position.
). If you want to switch to another ironing temperature, press
)" to "High ( )" to "MAX".
LINEN
)" to
NYLON
ENGLISH – 5