Table of Contents
Advertisement
Enable this account
ISDN
PPTP
IPSec Tunnel
L2TP
Specify Remote Node
Vigor3100 Series User's Guide
Check the box to enable this function.
Idle Timeout- If the dial-in user is idle over the limitation of
the timer, the router will drop this connection. By default, the
Idle Timeout is set to 300 seconds.
Allow the remote ISDN dial-in connection. You can further set
up Callback function below. You should set the User Name and
Password of remote dial-in user below
Allow the remote dial-in user to make a PPTP VPN connection
through the Internet. You should set the User Name and
Password of remote dial-in user below
Allow the remote dial-in user to trigger a IPSec VPN
connection through Internet.
Allow the remote dial-in user to make a L2TP VPN connection
through the Internet. You can select to use L2TP alone or with
IPSec. Select from below:
None - Do not apply the IPSec policy. Accordingly, the VPN
connection employed the L2TP without IPSec policy can be
viewed as one pure L2TP connection.
Nice to Have - Apply the IPSec policy first, if it is applicable
during negotiation. Otherwise, the dial-in VPN connection
becomes one pure L2TP connection.
Must -Specify the IPSec policy to be definitely applied on the
L2TP connection.
Check the checkbox-You can specify the IP address of the
remote dial-in user or peer ID (should be the same as the ID you
set in the Local ID of IKE advanced settings window). Enter
Peer ISDN number if you select ISDN above. Also, you should
87
Advertisement
Table of Contents
