Table of Contents
Advertisement
3
.
9
.
5
C
a
l
l
C
o
3
.
9
.
5
C
a
l
l
C
o
Some applications require that the router (only for the ISDN models) be remotely activated, or
be able to dial up to the ISP via the ISDN interface. Vigor routers provide this feature by
allowing user to make a phone call to the router and then ask it to dial up to the ISP.
Accordingly, a teleworker can access the remote network to retrieve resources. Of course, a
fixed IP address is required for WAN connection and some internal network resource has to be
exposed for remote users, such as FTP, WWW.Please set Dialing to a Single ISP first before
configuring this web page.
Dial Retry
Dial Delay Interval
Remote Activation
Link Type
PPP Authentication
TCP Header Compression
106
n
t
r
o
l
n
t
r
o
l
It specifies the dial retry counts per triggered packet. A
triggered packet is the packet whose destination is outside the
local network. The default setting is no dial retry. If set to 5, for
each triggered packet, the router will dial 5 times until it is
connected to the ISP or remote access router.
It specifies the interval between dialup retries. By default, the
interval is 0 second.
It specifies a phone number in the Remote Activation field to
enable the remote activation function. If the router accepts a call
from the number 12345678, it will terminate the incoming call
immediately and dial to the ISP.
Because ISDN has two B channels (64Kbps/per channel), you
can specify whether you would like to have single B channel,
two B channels or BOD (Bandwidth on Demand). Four options
are available: Link Disable, Dialup 64Kbps, Dialup 128Kbps,
Dialup BOD.
It specifies the PPP authentication method for PPP/MP
connections. Normally you can set it to PAP/CHAP for better
compatibility.
VJ Compression - It is used for TCP/IP protocol header
compression. Normally it is set to None to improve bandwidth
Vigor3100 Series User's Guide
Advertisement
Table of Contents
