Table of Contents
Advertisement
3
.
1
0
.
2
G
e
n
e
r
3
.
1
0
.
2
G
e
n
e
r
By clicking the General Settings, a new web page will appear so that you could configure the
SSID and the wireless channel. Please refer to the following figure for more information.
Enable Wireless LAN
Mode
SuperG Overdrive
Index(1-15)
110
a
l
S
e
t
u
p
a
l
S
e
t
u
p
Check the box to enable wireless function.
Select an appropriate wireless mode.
Mixed (11b+11g+SuperG) - The radio can support
IEEE802.11b, IEEE802.11g and SuperG protocols
simultaneously.
Mixed (11b+11g) - The radio can support both
IEEE802.11b and IEEE802.11g protocols simultaneously.
SuperG - The radio only supports SuperG.
11g only - The radio only supports IEEE802.11g.
11b only - The radio only supports IEEE802.11b.
Enhance the transmission rate up to 108Mbps between the
host and the clients. Generally, the maximum transmission
rate is 54Mbps without such feature. Notice that the
network card in client must also support SuperG. If not, the
rate would be 54Mbps even if you enable this function.
Set the wireless LAN to work at certain time interval only.
You may choose up to 4 schedules out of the 15 schedules
pre-defined in Applications >> Schedule setup. The
default setting of this filed is blank and the function will
always work.
Vigor3100 Series User's Guide
Advertisement
Table of Contents
