Table of Contents
Advertisement
3
.
2
.
5
B
i
n
d
I
P
3
.
2
.
5
B
i
n
d
I
P
This function is used to bind the IP and MAC address in LAN to have a strengthen control in
network. When this function is enabled, all the assigned IP and MAC address binding together
cannot be changed. If you modified the binding IP or MAC address, it might cause you not
access into the Internet.
Click LAN and click Bind IP to MAC to open the setup page.
Enable
Disable
Strict Bind
ARP Table
Add and Edit
Refresh
IP Bind List
Vigor3100 Series User's Guide
t
o
M
A
C
t
o
M
A
C
Click this radio button to invoke this function. However, IP/MAC
which is not listed in IP Bind List also can connect to Internet.
Click this radio button to disable this function. All the settings on
this page will be invalid.
Click this radio button to block the connection of the IP/MAC which
is not listed in IP Bind List.
This table is the LAN ARP table of this router. The information for
IP and MAC will be displayed in this field. Each pair of IP and
MAC address listed in ARP table can be selected and added to IP
Bind List by clicking Add below
IP Address – Type the IP address that will be used for the
specified MAC address.
Mac Address – Type the MAC address that is used to bind with
the assigned IP address.
It is used to refresh the ARP table. When there is one new PC added
to the LAN, you can click this link to obtain the newly ARP table
information.
It displays a list for the IP bind to MAC information.
.
45
Advertisement
Table of Contents
