Power Supply; Audio Connection; Lan Connection; Wi-Fi Operation - Kompernass IUK 5 A1 Quick Installation Manual

Power supply

♦ Use only the supplied mains adapter
♦ Push the plug of the mains adapter cable into the power supply socket
adapter into a properly connected power socket that supplies the voltage specified in the
technical data.

Audio connection

NOTE
► The audio signal, which can be transferred to the camera from a microphone connected to
the computer and played back via the integrated speaker, is supplied via the AUDIO output
socket and can be transferred from there to an external amplifier.
♦ Connect a suitable 3.5 mm mini jack cable (not included in the delivery) to the AUDIO
output if you want to amplify the audio signal. For this purpose, please also follow the
instructions of the connected playback device.

LAN connection

♦ To use the camera image on a wired network, connect the LAN connection
router or switch using the supplied cable or other suitable cable.

Wi-Fi operation

♦ To use the camera image on a wireless network, screw the supplied Wi-Fi antenna
the threaded connection

Alarm connection

♦ You can connect the camera to an existing alarm system via the Alarm connection
(IN/OUT)
♦ The alarm connection consists of a total of 4 contacts. You can connect alarm signals, e.g.
motion sensors or other alarm devices, to the two IN contacts. If the IN contacts are con-
nected externally to each other, an alarm is triggered. The connection can take place via a
switch or relay.
♦ An external device such as an alarm, a siren or a door opener can be connected to the two
OUT contacts. Here, a signal is produced as soon as the output is manually activated or when
the output is selected for alarm signals and the surveillance camera recognises an alarm. The
maximum switching capacity of the OUT contacts is 5 V/500 mA.
♦ For more information, read the operating instructions of the components involved.
IUK 5 A1
.
.
to operate the device.
. Then plug the mains
to a network
into
11
GB