Preface - Siemens ET 200S 1SI Function Manual

Preface

Contents of the function manual
This document is part of the SIMOTION Programming - References documentation package.
This manual is a supplement to SIMATIC manual
This documentation is supplied with the SIMOTION SCOUT in electronic form!
Note
The function blocks have been developed for the ET 200S 1Sl serial interface module (3964R,
ASCII) with Article No. 6ES7 138-4DF0☐-0AB0.
This supplement will enable you to correctly integrate and commission the ET 200S 1Sl serial
interface module in a SIMOTION system.
Differences in handling which result from the software architecture of a SIMOTION system as
compared to the software architecture of a SIMATIC system will be described.
Function block
The function blocks for communication between the SIMOTION system and the ET 200S 1Sl
serial interface module are part of the program library of the "SIMOTION SCOUT" engineering
system.
Sections in this manual
The following sections of the manual describe the function blocks (FBs) used in a SIMOTION
system.
● General
This section describes the similarities and differences in handling the ET 200S 1Sl serial
interface module.
● Function blocks of the ET 200S 1Sl serial interface module
This section describes the function blocks required for communication between a
SIMOTION system and an ET 200S 1Sl serial interface module.
● Alarm processing
This section describes the differences in alarm processing in the SIMOTION system
compared to the SIMATIC system.
● SIMATIC and SIMOTION names
This section contains a comparison of SIMATIC and SIMOTION names.
● The index allows you to locate information quickly.
Supplement to the ET 200S 1SI serial interface module
Function Manual, 01/2015, xxx
ET 200S 1Sl Serial Interface Modules .
3