Installing The Cpu - Intel Xeon E7500 User Manual

INTRODUCTION

Installing the CPU

The IB900 CPU Card supports a CPU socket for Intel Xeon processors.
This socket comes with a lever to secure the processor. Raise this lever to
about a 90° angle to allow the insertion of the processor. Place the
processor into the socket by making sure the notch on the corner of the
CPU corresponds with the notch on the inside of the socket. Once the
processor has slide into the socket, return the lever to the lock position.
Refer to the figures below.
After you have installed the processor into the socket, check if the
jumpers for the CPU type and speed are correct.
NOTE: Ensure that the CPU heat sink and the CPU top surface are in
total contact to avoid CPU overheating problem that would
cause your system to hang or be unstable.
6
135°
IB900 User' s Manual
135°