Super IO Device
This field contains options related to IO devices including FDD, serial
ports, IR, and parallel port devices. The options and the respective default
settings are listed below.
Onboard FDC Controller : Enabled
Onboard Serial Port 1 : 3F8/IRQ4
Onboard Serial Port 2 : 2F8/IRQ3
UART Mode Select : Normal
RxD, TxD Active : Hi, Lo
IR Transmission Delay : Enabled
UR2 Duplex Mode : Half
Use IR Pins : IR-Rx2Tx2
Onboard Parallel Port : 378/IRQ7
Parallel Port Mode : SPP
EPP Mode Select : EPP1.7
ECP Mode Use DMA : 3
PWRON After PWR-Fail : Off
IB900 User' s Manual
BIOS SETUP
33