Table of Contents
Advertisement
For a comfortable sleep, the air conditioner will operate it Fall asleep Sound sleep Wake up from
Temperature and fan speed changes in
• Fall asleep: Eases you into sleep by dropping the temperature.
• Sound sleep: Relaxes your body and raises your temperature slightly.
• Wake up from
• S et Off timer in
because the default is set to 8-hour-operation.
• I f the
If the
• R ecommended set temperature is between 25˚C~27˚C for cooling and 21˚C~23˚C for heating.
Maldives FJM Brazil_IB&IM_DB68-05639A-00_EN.indd 19
mode
When the air conditioner is on and in cool/heat mode
1. Press the
indicator appears and Off timer indicator starts blinking on the remote
f
controller display.
2. Press the Time Up or Time Down button to set the time.
You can set the time in half hourly unit from 30 minutes ~ 3 hours and hour unit from
f
3 hours ~ 12 hours.
Operating hour can be set from minimum 30 minutes to maximum 12 hours.
f
Default operation hour is set to 8 hours.
f
3. Press the Set button to active it on.
Off timer indicator stops blinking and reserved time will be displayed for 3 seconds.
f
Then the air conditioner operates in good'sleep mode.
If you don't press Set button within 10 seconds after pressing the
f
Time Up or Time Down button, the air conditioner will return to previous status.
Check Off timer indicator and
Cancel
Press the Cancel button once again.
You can set the desired temperature by 1˚C in the range of 16˚C~30˚C.
Fan speed will be adjusted automatically according to the
mode.
However, I f you select
you can adjust fan speed.
Air fl ow direction will be adjusted automatically according to the
However, if you select
you can adjust air fl ow direction.
mode: Allows you to wake up from comfortable intermittent air and it makes you feel refreshed.
mode over 5 hours. You fell disturbed sleep if the
mode is set less than 4 hours, the operation will stop at the same time.
mode is set over 5 hours, it will run as Wake up stage from the last one hour before it stops.
English-19
button on the remote controller.
indicator on the indoor unit.
mode while heating operation is on,
mode.
mode while heating operation is on,
mode
mode.
or
is set too short or long
2015/8/15 10:44:56
Advertisement
Table of Contents
