Advertisement

Advertisement

Table of Contents
loading

Summary of Contents for Samsung AJ***JNADCH Series

  • Page 2 Features of your new air conditioner 2-step cooling 2-step cooling function will quickly cool the room to reach the desired temperature and then it will adjust the fan speed and air flow direction automatically to help you stay comfortable and refreshing.
  • Page 3: Table Of Contents

    Contents Preparation Safety precautions ......................4 Checking before use .
  • Page 4: Safety Precautions

    If you have any questions, call your nearest contact center or find help and information online at www.samsung.com. Important safety symbols and precautions: Hazards or unsafe practices that may result in severe WARNING personal injury or death.
  • Page 5 Do not install this appliance near a heater, inflammable material. Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct sunlight and water (rain drops). Do not install this appliance in a location where gas may leak. This may result in electric shock or fire.
  • Page 6 Safety precautions FOR POWER SUPPLY CAUTION When not using the air conditioner for a long period of time or during a thunder/lightning storm, cut the power at the circuit breaker. Failing to do so may result in electric shock or fire. WARNING FOR USING If the appliance is flooded, please contact your nearest service center.
  • Page 7 Do not insert your fingers or foreign substances into the outlet when the air conditioner is operating. Take special care that children do not injure themselves by inserting their fingers into the product. Do not touch the air flow blade with your hands or fingers during the heating operation.
  • Page 8 Safety precautions CAUTION FOR USING Do not place objects or devices under the indoor unit. Water dripping from the indoor unit may result in fire or property damage. (example electrical appliances) Check that the installation frame of the outdoor unit is not broken at least once a year.
  • Page 9 This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
  • Page 10: Checking Before Use

    Checking before use Operation ranges The table below indicates the temperature and humidity ranges the air conditioner can be operated within. Refer to the table for efficient use. Mode Indoor temperature Outdoor temperature Indoor humidity 61 °F~90 °F 23 °F~115 °F Cooling 80% or less (16 °C~32 °C)
  • Page 11: Checking The Name Of The Parts

    Checking the name of the parts Your air conditioner may slightly look diff erent from illustration shown below depending on your model. Main parts Room temperature sensor Air fi lter Air intake Air fl ow blade Air fl ow blade (up and down) (left and right) Display...
  • Page 12: Checking The Remote Controller

    Checking the remote controller indicator( ) appears on the remote controller display. Remote controller buttons Vertical air swing Activate/Deactivate vertical air flow blade movement automatically. Power Mode Turn on/off the air Set one of the 5 operating modes. conditioner. Temp + – Increase/Decrease the Adjust the fan speed.
  • Page 13 Remote controller display Transmit indicator Operation mode Low battery indicator indicator Set temperature/ Time (for Fan speed indicator Timer option) indicator This function is not good'sleep indicator available in this model. Vertical air swing indicator Options indicator This function is not available in this model.
  • Page 14: Basic Function

    Basic function Basic operation is an operation mode that can be selected by pressing the Mode button. Auto(2-Step Cooling or Heat) In Auto mode, the air conditioner will automatically set the temperature and fan speed depending on the room temperature detected by the room temperature sensor. 2-Step Cooling mode sets the air conditioner to operate in Fast + Cool mode when set temperature is lower than indoor temperature, and then the air conditioner will automatically operate in Dry mode when indoor temperature reaches set temperature.
  • Page 15 Press the button to turn on the air conditioner. Press the button to set the operating mode. Mode button, the mode will change in order of Auto, Cool, Dry, Fan and Heat. heating condition. Press the button to set the desired fan speed. Auto (Auto) Cool...
  • Page 16: Adjusting The Air Flow Direction

    Adjusting the air fl ow direction This function will allow you to adjust the air fl ow direction vertically. Press the button to make air fl ow blades vertically. Vertical air fl ow To keep the air fl ow direction in a constant direction, press the button again.
  • Page 17: Setting The On/Off Timer

    Setting the On/Off timer Setting the On timer When the air conditioner is off ; 1. Press the Timer button. 2. Press the button until (On) indicator starts to blink. 3. Press the SET button to set the On timer. - (On) indicator will keep blinking and you can set the time.
  • Page 18 Setting the On/Off timer Setting the Off timer When the air conditioner is on; 1. Press the Timer button. 2. Press the button until (Off ) indicator starts to blink. 3. Press the SET button to set the Off timer. - (Off ) indicator will keep blinking and you can set the time.
  • Page 19: Mode

    mode For a comfortable sleep, the air conditioner will operate in 3 stages in order of Fall asleep Sound sleep Wake up stage. When the air conditioner is operating in Cool/Heat mode; 1. Press the Timer button. 2. Press the button until ( ) indicator starts to blink.
  • Page 20: 2-Step Cooling Function

    2-Step cooling function 2-Step Cooling function will set the air conditioner to cool the room quickly to reach the set temperature when the indoor temperature is higher than the set temperature, and then the air conditioner will automatically operate in Dry mode when indoor temperature reaches set temperature.
  • Page 21: Using The Comfort Function

    Using the Comfort function You can set the Comfort function to provide mild cooling/heating. When the air conditioner is operating in Cool/Heat mode; 1. Press the Options button. 2. Press the button until (Comfort) indicator starts to blink. 3. Press the SET button to set the Comfort function. - (Comfort) will blink fi rst, then remain on the display as (Comfort) and Comfort function will begin.
  • Page 22: Using The Quiet Function

    Using the Quiet function You can reduce the noise generated from the indoor unit during Cool/Heat mode. When the air conditioner is operating in Cool/Heat mode; 1. Press the Options button. 2. Press the button until (Quiet) indicator starts to blink. 3.
  • Page 23: Using The Auto Clean Function

    Using the Auto clean function Auto clean function will minimise the moisture inside of the indoor unit. Activate this function to help provide you with clean air. When the air conditioner is operating; 1. Press the Settings button. 2. Press the button until (Clean) indicator starts to blink.
  • Page 24: Cleaning The Air Conditioner

    Cleaning the air conditioner Make sure to turn off the power of the indoor unit and cut-off the power supply before cleaning the air conditioner. CAUTION Cleaning the indoor unit needed. heat exchanger because it needs to be disassembled. should use a micro fi ber cloth to clean the panel. and remove any debris on the cloth to avoid scratches.
  • Page 25 Removing the Air fi lter Air fi lter There is a hole on the bottom right side of the fi lter. Put your fi nger in that hole to get a grip on the fi lter and slightly push it up to release the hooks from the bottom side. Then, pull it down to remove the fi lter from the main body.
  • Page 26 Cleaning the air conditioner Reassembling the Air filter 1. Put the filter on the main body and insert the hooks which are Air filter in the top of the Air filter into the the main body. 2. There’s one hook in both side of the filter, press the surface of the Air filter softly and get the hooks into the main body.
  • Page 27: Maintaining The Air Conditioner

    Maintaining the air conditioner If the air conditioner will not be used for an extended period of time, dry the air conditioner to maintain it in best condition. 1. Dry the air conditioner thoroughly by operating in Fan mode for 3 to 4 hours and cut-off the power supply.
  • Page 28: Troubleshooting

    Troubleshooting Refer to the following chart if the air conditioner operates abnormally. This may save time and unnecessary expense. PROBLEM SOLUTION The air conditioner does not work at all. conditioner again. again by pressing the Power button. The temperature adjustment is not temperature is set to auto and you cannot adjust the temperature.
  • Page 29 PROBLEM SOLUTION Fan speed adjustment is not mode. In these mode, fan speed is set to Auto and you cannot working. adjust the fan speed. Remote controller is not working. Light from fluorescent bulbs or neon signs may interrupt the remote signal.
  • Page 30 QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com/us/support - Consumer Electronics U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com/us/support - Mobile Phones [HHP] 1-888-987-HELP(4357) www.samsung.com/ca/support (English) CANADA 1-800-SAMSUNG(726-7864) www.samsung.com/ca_fr/support (French)
  • Page 31: User Manual

    This manual is made with 100% recycled paper. imagine the possibilities imagine the possibilities Thank you for purchasing this Samsung product. Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register EN ES FR...

Table of Contents