Scanning Vhf Channels; Adjusting The Vhf Squelch; Radio; Setting The Tuner Region - Garmin GPSMAP 10X2 Series Owner's Manual

Scanning VHF Channels

Before you can scan VHF channels, you must set the source to VHF.
You can monitor VHF channels saved as presets for activity and automatically switch to an active channel.
From the VHF media screen, select Scan.

Adjusting the VHF Squelch

NOTE: This feature is available on some stereos with a VHF receiver.
1 From the VHF source page, select MENU > Squelch.
2 Use the slider bar to adjust the VHF squelch.

Radio

To listen to AM or FM radio, you must have a suitable marine AM/FM antenna properly connected to the stereo
and be within range of a broadcasting station. For instructions on connecting an AM/FM antenna, see the
stereo installation instructions.
To listen to SiriusXM radio, you must have the appropriate equipment and subscriptions (SiriusXM Satellite
®
Radio, page 127). For instructions on connecting a SiriusXM Connect Vehicle Tuner, see the stereo installation
instructions.
To listen to DAB stations, you must have the appropriate equipment (DAB Playback, page 126). For instructions
on connecting a DAB adapter and antenna, see the installation instructions provided with your adapter and
antenna.

Setting the Tuner Region

1 From the media screen, select MENU > Installation > Tuner Region.
2 Select an option.

Changing the Radio Station

1 From the media screen, select an applicable source, such as FM.
2 Select or to tune to a station.

Changing the Tuning Mode

You can change how you select a station for some media types, such as FM or AM radio.
NOTE: Not all tuning modes are available for all media sources.
1 From the media screen, select MENU > Tuning Mode.
2 Select an option.
3 If necessary, select SELECT.

Presets

You can save your favorite AM stations and FM stations as presets for easy access.
You can save your favorite SiriusXM channels if the stereo is connected to an optional SiriusXM tuner and
antenna.
You can save your favorite DAB stations if the stereo is connected to the proper DAB equipment and set to the
correct tuner region. (DAB Playback, page 126)

Saving a Station as a Preset

1 From an applicable media screen, tune to the station to save as a preset.
2 Select Presets > Add Current Channel.
Media Player 125