Instruments and indicators
EMU26793
Water separator-alert indicator
This indicator will blink when water has accu-
mulated in the water separator. In such an
event, stop the engine and drain the water
from the separator.
This indicator only operates when a water
separator sensor is equipped.
EMU31642
Command link multifunction
meters
Command link multifunction meters have 6
kinds of meter units; tachometer unit (square
or round types), speedometer unit (square
type), speed & fuel meter unit (square or
round types), and fuel management meter
(square type). The indicator system is slightly
different between the round and square types.
Check the model and type of your unit careful-
ly. This manual describes mainly the alert in-
dicators. For more details on setting meters or
changing indicator systems, see the attached
operation manual.
EMU36102
Command link multifunction ta-
chometers
The tachometer shows the engine revolutions
per minute. It has functions of trim meter, ad-
justing trolling speed, cooling water/engine
temperature display, battery voltage display,
total hour/trip hour display, oil pressure dis-
play, water detection alert, engine trouble
36
alert, and periodic maintenance notification. If
optional sensors are connected to the unit,
cooling water pressure display will be avail-
able. For the optional sensor, consult your
Yamaha dealer. The tachometer unit is avail-
able in round or square types. Check your ta-
chometer unit type.
1
ZMU01755
1. Set button
2. Mode button
5
4
7
6
8
1. Tachometer
2. Trim meter
3. Multifunction display
4. Cooling water pressure
5. Cooling water/engine temperature
6. Water detection-alert indicator
7. Battery voltage
8. Oil pressure (4-stroke models)
2
ZMU05415
1
2
3
ZMU05416