Specifications And Requirements; Specifications - Yamaha F200 Owner's Manual

EMU34520

Specifications

TIP:
"(AL)" stated in the specification data below
represents the numerical value for the alumi-
num propeller installed.
Likewise, "(SUS)" represents the value for
stainless steel propeller installed and "(PL)"
for plastic propeller installed.
TIP:
"*" means, select the engine oil referring to the
chart of engine oil paragraph. For further infor-
mation, see page 16.
EMU2821C
Dimension:
Overall length:
868 mm (34.2 in)
Overall width:
634 mm (25.0 in)
Overall height X:
1805 mm (71.1 in)
Transom height X:
643 mm (25.3 in)
Weight (without propeller) X:
272.0 kg (600 lb)
Performance:
Full throttle operating range:
5000–6000 r/min
Maximum output:
F200TR 147.1 kW@5500 r/min (200
HP@5500 r/min)
F225TR 165.5 kW@5500 r/min (225
HP@5500 r/min)
LF200TR 147.1 kW@5500 r/min (200
HP@5500 r/min)
LF225TR 165.5 kW@5500 r/min (225
HP@5500 r/min)
Idling speed (in neutral):
700 ±50 r/min

Specifications and requirements

Engine:
Drive unit:
Type:
4-stroke V
Displacement:
3352.0 cm³
Bore × stroke:
94.0 × 80.5 mm (3.70 × 3.17 in)
Ignition system:
TCI
Spark plug (NGK):
LFR5A-11
Spark plug gap:
1.0–1.1 mm (0.039–0.043 in)
Control system:
Remote control
Starting system:
Electric
Starting carburetion system:
Electronic fuel injection
Valve clearance (cold engine) IN:
0.17–0.23 mm (0.0067–0.0091 in)
Valve clearance (cold engine) EX:
0.31–0.37 mm (0.0122–0.0146 in)
Min. cold cranking amps (CCA/SAE):
512.0 A
Min. marine cranking amps (MCA/ABYC):
675.0 A
Min. reserve capacity (RC/SAE):
182 minutes
Maximum generator output:
45.0 A
Gear positions:
Forward-neutral-reverse
Gear ratio:
2.00 (30/15)
Trim and tilt system:
Power trim and tilt
13