Basic Operation And Calibration/Reset Instructions - Planar PLL2470W User Manual

Basic Operation and Calibration/Reset Instructions

Before using the LED LCD Monitor:
 Connect external equipment properly.

Insert the power plug, and the power LED indicator will light orange.
Power On/Off
To turn the LED LCD Monitor on/off:
Press button on the front. The power LED indicator light will be blue when the LED LCD
Monitor is on.
Using the OSD Menu
Use OSD menus to adjust settings by using the menu button on the front of the LED LCD
Monitor.
1
2
▼
▲
▼ + ▲
OSD Lock Out Function
When LED LCD Monitor is in normal mode, the "OSD Lock Out" function can be enabled.
Option 1: OSD lock – all 4 buttons are locked except the "POWER" button.
Press and hold the 1 button and the ▲ button for 3 seconds to lock the OSD buttons.
The LED LCD Monitor will show an "OSD LOCKED" message for 5~10 seconds and the message
will disappear automatically.
Repeat this step to unlock.
Displays main menu
Exits from OSD menu
Confirm the selection
Selects between VGA, DVI or Auto mode / Press the button for three
seconds to auto adjust the image (VGA only)
Select the desired item when in OSD menu
When not in OSD menu, directly enters Contrast/Brightness Setting menu.
Select the desired item when in OSD menu
When not in OSD menu, directly enters Preset Mode
Recalls both Contrast and Brightness (when not in OSD menu)
10