Removing Mig Gun To Replace With A Spool Gun - Hobart Multi-Handler 200 Owner's Manual

.
A complete Parts List is available at www.HobartWelders.com

5-16. Removing MIG Gun To Replace With A Spool Gun

Cut Off End Of Wire.
Open Pressure Assembly.
Turn Off Power.
Knob
.
Hold wire tightly to keep it
from unraveling.
Loosen Knob, Disconnect Gun Trigger Plug,
Rewind Wire Onto Spool, Fasten
And Remove Gun From Unit.
End Of Wire To Spool.
Insert Power Pin, Connect Spool Gun
Trigger Plug, And Tighten Knob.
Tools Needed:
287758A / Ref. 802982A / Ref. 282722A / Ref. 282721A
OM-285922 Page 29