Generator / Inverter Requirements - Hobart Multi-Handler 200 Owner's Manual

5-7. Generator / Inverter Requirements

Generator settings, if applicable.
!
Engine Control Switch must be set at "RUN"
position − not "RUN/IDLE".
Notes
.
A complete Parts List is available at www.HobartWelders.com
!
Set generator Fine Adjustment Control
to 10 for maximum auxiliary power.
Minimum auxiliary power require-
ment at rated load is 10 KW continu-
ous/12.5 KW peak at 240 volts AC
for full output. Smaller generators
will reduce output capability.
OM-285922 Page 21