Setting The Auto Preset Memory; Option Setup; Setting The Power Amplifier Assignment - Denon AVR-1707 Operating Instructions Manual

ENGLISH
Advanced Setup – Part 1

Setting the Auto Preset Memory

Up to 56 FM stations can be preset automatically (
1 F F
Press to start.
• "CH" blinks on the display and searching begins.
• "Completed" appears once searching is completed.
2
ENTER
Press to enter the setting and switch to the

Option Setup.

1
S e a r c h
C O M P L E T E D
2
• If an FM station cannot be preset automatically due to poor
reception, use the "Manual tuning" operation (
in the station, then preset it using the manual "Preset memory"
operation ( page 31).
Option Setup
page 30).

Setting the Power Amplifier Assignment

To suit your preference, a surround back channel's power amplifier
can be assigned to the front channel ("Front A" or "Front B") for bi-
amp playback, ZONE2.
1
F F G G
Press to select "3. Op", then press
2
F F G G
Press to set.
S.Back:
The surround back speakers are used in MAIN ZONE.
ZONE2:
This mode assigns the surround back amplifier channels to provide
ZONE2 speaker-level outputs from the surround back speaker
terminals.
Front A, Front B:
This provides a bi-amp mode for the 2 main front speakers,
replicating the front A or front B amplifier channel's outputs.
page 31) to tune
3
ENTER H H
Press or
the Volume Control setting.
1
O p t i o n S e t u p
2
1 P . A m p S . B a c k
ENTER
.
to enter the setting and switch to
1 P . A m p Z O N E 2
3
2 L i m i t 0 d B
43
ENGLISH
Advanced Setup – Part 1
Front Bi-Amp connections
Dynamic sound with a range wider than that of full range
systems can be played by connecting bi-amp compatible
speakers to the AVR-1707. Be sure to consult the owner's
manual of your bi-amp-capable speakers for further
information before proceeding.
AVR-1707
Speaker [R] Speaker [L]
NOTE:
• When making bi-amp connections, be sure to remove the
short-circuiting bar included with the speaker.