Table of Contents
Advertisement
24
Log Set Installation
The logs are fragile, especially after being exposed to heat.
Make sure the gas control valve is OFF and the heater is cool before servicing.
The burner must be correctly positioned before installing the logs. Make sure
the burner is fully seated and the pilot is properly aligned.
Rear Log Installation
Place the rear log with the left side flush to the edge of the burner and the right side flush to the metal
deflector on the back edge of the burner. The bottom edge of the log should be located behind the burner
ports (see the illustration below).
© Travis Industries
Maintenance
3/19/2021 - 1422
21TRV GSR2 Owners
Advertisement
Table of Contents
