Adding A Person On Hold To A Conference Call; Adding A Person On Hold To A Conference Call By Using Conference Button - Avaya J159 Manual

Managing conference calls
Procedure
1. During an active call, navigate to the required extension by using the navigation cluster
and, press Conference button.
The phone puts the existing call on hold and initiates conference to the third participant.
2. When the third participant answers the call, press the Join soft key or press Conference
button.
3. To add another person, press Add and repeat Steps 2 and 3.

Adding a person on hold to a conference call

About this task
You can add a held call to a conference call.
Procedure
1. On the Phone screen, select your active call.
2. Press Conf or Add or Conference button if you are already in a conference.
3. Press Held Call soft key to see a list of held calls.
4. Select the call on hold that you want to add to the conference.
5. Press one of the following:
• Join
• OK
• Conference button
The held call is added to the conference call.
Adding a person on hold to a conference call by using
conference button
About this task
You can add a held call to a conference call by using conference button. The conference button on
the phone provides you quick access to use the conference feature.
Procedure
During an active call, navigate to an existing held call and, press Conference button.
The held call is connected to the conference call.
April 2021 Using Avaya J159 SIP IP Phone in Avaya Aura
Comments on this document? infodev@avaya.com
®
62