Unlocking Your Phone; Setting The Network Mode - Avaya J159 Manual

Unlocking your phone

About this task
You can unlock your phone using a PIN or a password. Depending on the configuration made by
your administrator, the phone screen displays the field for entering either a PIN or a password. A
PIN is a digit-only value whereas a password can be an alphanumeric value.
If you do not know or remember your PIN or password, contact your administrator.
You cannot unlock the phone if you enter an incorrect PIN or password.
Your administrator sets a limit to the number of incorrect attempts. If you exceed the limit, the
phone temporarily blocks you from attempting to unlock the phone for a period that your
administrator specifies.
To unlock the phone, press Unlock and enter the PIN or password.

Setting the network mode

About this task
You can set the network mode to Ethernet or Wi-Fi. You do not need to perform this procedure if
your phone is configured to connect to Ethernet or a specific Wi-Fi network.
Before you begin
Ensure that the system administrator gave you access to perform this task.
Procedure
1. Press the Main menu.
2. Scroll to Settings and press Select.
3. Scroll to Network and press Select.
4. Scroll to Network mode.
The Network mode setting shows the following options:
• Ethernet: To connect to an Ethernet network.
• Wi-Fi: To connect phone to a Wi-Fi network.
5. Press one of the following:
• Toggle
• Right Arrow key
• Left Arrow key
6. When Network mode displays Wi-Fi, the following lines are shown on the Phone screen:
• SSID: The name of the Wi-Fi network that the phone is either currently connected to, or
will attempt to connect to if you start the connection process.
April 2021 Using Avaya J159 SIP IP Phone in Avaya Aura
Comments on this document? infodev@avaya.com
Unlocking your phone
®
23